Römer TRIFIX User's Guide download pdf (Page 1)

TWO-YEAR WARRANTY

CARE AND MAINTENANCE

Seat shell

ISOFIX locking arms

Fabric loop

User guide compartment

Top Tether

ISOFIX indicators

ISOFIX unlocking buttons

Recline handle

Adjustment strap

Adjusting button

Shoulder straps

Shoulder pads

Harness buckle

Harness retainer

Headrest

ISOFIX insert guides

ISOFIX attachment points (car)

Please observe the instructions on the use of child restraint systems described in

your vehicle owner’s manual.

The seat may be used in all vehicles equipped with the ISOFIX and Top Tether

anchoring systems. Please consult your vehicle owner’s manual for information

about the Top Tether anchoring points and the seats which are approved for child

safety seats in the weight class 9-18 kg.

BRITAX RÖMER

Child safety seats

Testing and certi cation in accordance with ECE R 44/04

Group Body weight

KID 2 - 3 15 - 36 kg

KID plus 2 - 3 15 - 36 kg

KIDFIX 2 - 3 15 - 36 kg

KIDFIX SICT 2 - 3 15 - 36 kg

In the direction of travel Yes

Against the direction of travel No

On seats featuring:

ISOFIX attachments (between

seat surface and backrest) and

Top Tether anchoring points (for

example on the parcel shelf, on

the  oor or behind the backrest)

Yes

NEXT CHILD SAFETY SEATS

USE IN THE VEHICLE

1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus)

only if the vehicle seat is also approved for use by adults. The seat must not be

positioned anywhere where it is in range of an airbag which is being deployed.

2) If there is a front airbag: Slide the passenger seat a long way back and refer to

any instructions in vehicle owner’s manual.

*ECE = European Standard for Child safety Equipment

BRITAX RÖMER

child safety seat

Tested and certi ed according

to ECE* R 44/04

Group Body weight

TRIFIX 1 9 bis 18 kg

The child safety seat has been designed, tested and certi ed according to the requirements of the European

Standard for Child Safety Equipment (ECE R 44/04). The test mark E (in a circle) and the certi cation number

are located on the orange certi cation sticker (sticker on the child safety seat).

• This certi cation will be invalidated if you make any modi cations to the child safety seat.

• The TRIFIX child safety seat must only be used to secure your child in the vehicle. It must never be used as a

seat or toy in the home.

To ensure the full protective effect of the child safety seat:

• In the event of an accident with an impact speed above 10

km/h it is possible that the child safety seat may have been

damaged, but that the damage may not be immediately

obvious. In this case the child safety seat must be replaced.

Please dispose of it properly.

• Regularly check all important parts for damage. Make sure

that the mechanical components in particular are all in per-

fect working order.

• To prevent damage, ensure that the child safety seat does

not become jammed between hard objects (car door, seat

runners etc.).

• Always have the child safety seat checked if it has been da-

maged (e.g. if it is dropped).

• Never lubricate or oil parts of the child seat.

Please observe the waste disposal regulations in your country.

For this child safety seat we offer a 2-year warranty against manufacturing or

material defects. The warranty period is effective from the day of purchase.

The warranty covers only child safety seats which have been handled properly

and which have been sent to us in a clean and proper condition.

The Warranty does not cover:

• natural signs of wear and damage resulting from excessive stress

• damage resulting from inappropriate or improper use

What is covered by the warranty?

Fabrics: All of our fabrics meet very high requirements with regard to colour

fastness when exposed to UV radiation. Nevertheless, all fabrics fade when

exposed to UV radiation. This is not a material defect, but rather a normal sign

of wear which is not covered by the warranty.

Buckle: Buckle malfunctions are often due to accumulations of dirt or foreign

bodies which may stop the buckle from working properly. If this happens, the

buckle can be cleaned, olease follow the procedure described in your user

instructions.

Please contact your retailer immediately in the event of a warranty claim. He or

she will give you the advice and support you need. When processing claims,

product-speciﬁ c depreciation rates will be applied. Please refer to our General

Terms and Conditions which are available from your retailer.

Use, care and maintenance

The child safety seat must be used in accordance with the user instructions.

We point out expressly that only genuine accessories and replacement parts

must be used.

(Please observe the applicable regulations in your country)

Adjusting ring of the headrest

CARE INSTRUCTIONS

Disposal of packaging Container for cardboard

Cover Residual waste, thermal utilisation

Plastic parts In accordance with the labelling in the

designated container

Metal parts Container for metals

Harness straps Container for polyester

Buckle &latch Residual waste

PRODUCT OVERVIEW

Care for the harness buckle

It is vital for the safety of your child that the harness buckle works correctly.

Malfunctions of the harness buckle are usually caused by accumulations of dirt

or foreign bodies:

• The buckle latches are ejected only slowly when the red release button is

pressed.

• The buckle latches will no longer lock home (i.e. they are ejected again if you

try to push them in).

• The buckle latches engage without an audible „click“.

• The buckle latches are difﬁ cult to insert (you feel resistance).

• The buckle only opens if extreme force is applied.

Remedy

wash out the harness buckle so that it functions properly once again:

Cleaning the harness buckle

1. Open the harness buckle

(press the red button).

2. Pull the elastic loop over the harness buckle

2. Open the Velcro fastener on the crotch pad

and take off the crotch pad

from the cover.

3. Slide the metal plate

which is used to fasten the harness buckle

the seat shell up on its edge through the strap slot

4. Soak the harness buckle

in warm water with dishwashing liquid for at

least an hour. Then rinse and dry it thoroughly.

Cleaning

Please be sure to use only genuine Britax/RÖMER replacement seat covers,

as the seat cover is an integral part of the child safety seat which plays an

important role in ensuring that the system works properly. Replacement

seat covers are available from your retailer.

• The child seat must not be used without its cover.

• The cover can be removed and washed with a mild detergent using the

washing machine‘s cycle for delicate items (30 °C). Please observe the

instructions on the washing label of the cover.

• The plastic parts can be cleaned using soapy water. Do not use harsh

cleaning agents (such as solvents).

• The harnesses can be washed in lukewarm soapy water.

Caution: Never remove the buckle latches

from the straps.

• The shoulder pads can be washed in lukewarm soapy water.

Removing the cover

1. Press the recline handle

upwards and slide the seat shell

to the rear

into the upright position.

2. Loosen the harness straps as far as possible.

3. Open the harness buckle

(press the red button).

4. Open the Velcro fastener on the crotch pad

5. Slide the headrest

to its lowest position.

6. Remove the cover of the headrest

7. Open the poppers on the left and right of the rear part of the cover.

8. Fold the rear part of the cover onto the seat surface.

9. Thread the harness straps through the cutout in the cover.

10. Unhook both of the elastic hoops at the rear, upper edge of the seat shell.

11. Unhook the elastic seam of the cover under the edge of the seat shell.

TIP: Start at the handles on the side and at the upper edge of the seat shell.

12. Pull the cover up and over the bezel of the strap adjuster.

13. Feed out the harness buckle

and the end of the strap from the cover.

14. Pull the cover upwards a little and then put it with the cutout over the head-

rest

Re-ﬁ tting the Cover:

Simply follow the steps in the opposite order.

Caution: Check that the harness straps are not twisted and that they have

been correctly inserted in the belt slots on the cover.

BRITAX RÖMER

Kindersicherheit GmbH

Blaubeurer Straße 71

D-89077 Ulm

Germany

t: +49 (0) 731 9345 0

f: +49 (0) 731 9345 210

e: [email protected]

www.roemer.eu

BRITAX EXCELSIOR LIMITED

1 Churchill Way West

Andover

Hampshire SP10 3UW

United Kingdom

t: +44 (0) 1264 333343

f: +44 (0) 1264 334146

e: [email protected]

www.britax.eu

TRIFIX

9 - 18kg

User Instructions

User_guide_TRIFIX_GB.indd 1 17.01.2012 08:47:05

1 2

9 - 18kg 1

Summary of Contents

Page 1 - 9 - 18kg

030405060708121314151701021609101118TWO-YEAR WARRANTY CARE AND MAINTENANCE Seat shell ISOFIX locking armsFabric loopUser guide compartmentTop TetherIS

Page 2

1. Pull the grey fabric loop 16 to pull out both locking arms 17 until you hear a clicking sound which indi-cates they are fully engaged.2. Take the T

Comments to this Manuals

No comments

Römer TRIFIX User's Guide Page 1

Browse online or download User's Guide for Car seats Römer TRIFIX. Römer TRIFIX User Manual

Summary of Contents

Comments to this Manuals